Easy-to-Install indoor alarm system with WiFi connectivity, remote notification, battery backup and auto reset.
The MySpy™ WiFi Messenger system monitors and reports any residential alarm condition (contact closure), including sump high water level (float switch), or under/over temperature alarms. When the contact closes, the alarm notifies the user locally (audible and visual alarm) and remotely via SMS text messages and/or emails over a WiFi or Ethernet network to a smartphone, tablet or computer.
The alarm works with your existing WiFi or Ethernet network, so it does not rely on cellular connection which means no monthly fees or contracts. Easy installation and setup!
Five-Year Limited Warranty
VOLTAGE FOR 120 VAC MODEL:
Primary: 120 VAC, 60 Hz, 2.4 watts max. (alarm condition)
Secondary: 9 VDC
BATTERY BACKUP POWER:
6 x 4 x 2.25 inches (15.24 x 10.16 x 5.71 cm), NEMA 1 plastic
87 decibels at 10 feet (3 meters)
AUXILIARY ALARM CONTACTS:
Voltage: 120 VAC
Current: 0.5 amps maximum N/O
0.5 amps maximum N/C
6 foot (1.8 meter)
FLOAT SWITCH CONNECTION TERMINAL:
For float switch connection only. Do not apply power. (Voltage across terminals is 8-9 VDC)
SJE SignalMaster® control switch with mounting clamp
Cable: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, water resistant (CPE)
Float: 2.74 inch diameter x 4.83 inch long (7 cm x 12.3 cm), high impact, corrosion resistant poly propylene housing for use in sewage and non-potable water to up 140oF (60oC)
Maximum Water Depth: 30 feet (9 meters), 13 PSI
Electrical: 5 amps, 125 VAC/250 VAC, 50/60 Hz
Connect using push-button WiFi Protected Setup (WPS) or manually by using Ethernet connection (ethernet cable not provided)
Requires an ethernet connection (ethernet cable not provided)
Cellular WiFi hotspots are not recommended for use with this WiFi alarm, as intermittent or unreliable notification service can result
Adobe Acrobat is a free download to view .pdfs
Visit our downloads section of this website for additional literature.